Focus On Oracle

Installing, Backup & Recovery, Performance Tuning,
Troubleshooting, Upgrading, Patching, Zero-Downtime Upgrade, GoldenGate

Oracle Exadata ,Oracle ODA, Oracle ZDLRA

当前位置: 首页 » 技术文章 » 案列分析



-> show /system/open_problems(由于之前的错误已清除,没有记录详细的信息,所以这里看不到问题)

Open Problems (0)
Date/Time                 Subsystems          Component
------------------------  ------------------  ------------

-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
faultmgmtsp> help
Built-in commands:
  echo   - Display information to user.
           Typical use: echo $?
  help   - Produces this help.
           Use 'help <command>' for more information about an external command.
  exit   - Exit this shell.

External commands:
  fmadm  - Administers the fault management service
  fmdump - Displays contents of the fault and ereport/error logs
  fmstat - Displays statistics on fault management operations
faultmgmtsp> fmadm
Usage: fmadm <subcommand>
  where <subcommand> is one of the following:
    faulty [-asv] [-u <uuid>]      : display list of problems
    faulty -f [-a] [<FRU>]         : display FRUs with problems
    faulty -r [-a]                 : display ASRUs with problems
    list [-asv] [-u <uuid>]        : display list of problems
    list -f [-a] [<FRU>]           : display FRUs with problems
    list -r [-a]                   : display ASRUs with problems
    list-fault [-asv] [-u <uuid>]  : display list of faults
    list-defect [-asv] [-u <uuid>] : display list of defects
    list-alert [-asv] [-u <uuid>]  : display list of alerts
    acquit <FRU>                   : acquit problems on a FRU
    acquit <UUID>                  : acquit problems associated with UUID
    acquit <FRU> <UUID>            : acquit problems specified by
                                     (FRU, UUID) combination
    clear class@path|<UUID>        : clear an event or UUID
    replaced <FRU>                 : fixed problems via FRU replacement
    repaired <FRU>                 : repaired a FRU
    repair <FRU>                   : repaired a FRU
    reset -s all|FRU1[:FRU2...]    : reset SERD counters for all
                                     or some FRUs
    rotate errlog                  : rotate error log
    rotate infolog                 : rotate ireport log
    rotate fltlog                  : rotate fault log
faultmgmtsp> fmadm repair 5e401d78-63a9-4cf1-b3e3-e38396e7770a
faultmgmtsp> fmadm  list
No faults found
faultmgmtsp> exit
-> show /system/open_problems
Open Problems (0)
Date/Time                 Subsystems          Component
------------------------  ------------------  ------------
-> show /SP/faultmgmt
-> set /SP/users/root password

Enter new password: ********

Enter new password again: ********
-> set component_path clear_fault_action=true
    Are you sure you want to clear component_path (y/n)? y
    Set ‘clear_fault_action’ to ‘true
 Host CPU (/SYS/MB/P#)
 Memory Riser (/SYS/MB/P0/MR#)
 Motherboard (/SYS/MB)
 Fan module (/SYS/FM#)
 PCI card (SYS/MB/PCIE#)    

-> set /SYS/MB/P1 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)? y
Set 'clear_fault_action' to 'true'

set /SP/network pendingipdiscovery=static pendingipaddress= pendingipgateway= pendingipnetmask=
set /SP/network commitpending=true

set /SP/network pendingipdiscovery=static
set /SP/network pendingipaddress=<IP Address>
set /SP/network pendingipgateway=<gateway-IPaddr>
set /SP/network pendingipnetmask=<netmask>
set /SP/network commitpending=true

在OS上也可通过ipmitool sunoem cli "show /SP/network"命令来查看

关键词:ilom sparc 


Oracle SPARC ZFS文件系统
SPARC S7-2初始化加载
Oracle ILOM Issue
在Sparc T5-2上安装和配置PCIe闪存卡
Oracle SuperCluster 软件架构简介